Analog Guest Service Key
Programming
STORING A NUMBER INTO MEMORY
KEYS OR ONETOUCH KEY
Each location can store up to 32 digits in tone
mode .
Note: A “Pause” or “Flash” programmed into
memory counts as one digit when storing a number.
1 . Set the Speakerphone in the OFF mode
(inactive) .
2 . Press
*#79*# + M(n) . Enter the
number to be stored using the numeric
dial pad (that is, *#79*# + M1) .
The phone will generate “Di-Du” sound .
3 . If additional numbers are to be stored,
repeat steps 2 through 3 .
PROGRAMMING FLASH TIMING AND
PAUSE TIMING
Flash timing options are 100 mS through 1000 mS,
programmable in 100 mS increments .
• The default Flash timing is 600 mS .
• Pause timing options are 1 .0 s through 5 .0 s .
The default Pause timing is 3 .6 s .
PROGRAMMING FLASH TIMING
1 . Set the Speakerphone in the OFF mode
(inactive) .
2 . Press
*#78*# + number (1-0) + Conf .
The phone will generate “Di-Du” after the
setting is complete (that is, *#78*# + 9 +
Conf - Flash = 900 ms) .
PROGRAMMING PAUSE TIMING
3 . Set the Speakerphone in the OFF mode
(inactive) .
4 . Press
*#78*# + number (1-5) + Redial .
The phone will generate “Di-Du” after the
setting is complete (that is, *#78*# + 5 +
Redial – Pause = 5 s) .
Note: Use step 2 when programming Flash. Use
step 4 when programming Pause.
12
www.teledex.com
M SERIES ANALOG CORDED USER GUIDE
