background image

4 

www.teledex.com

    DIAMOND SERIES USER GUIDE

installation. This equipment generates, uses, 
and can radiate radio frequency energy and, if 
not installed and used in accordance with the 
instructions, may cause harmful interference 
to radio communications. However, there is no 
guarantee that interference will not occur in a 
particular installation. If this equipment does 
cause harmful interference to radio or television 
reception, which can be determined by turning 
the equipment off and on, the user is encouraged 
to try to correct the interference by one or more 
of the following measures: 
  1.   Move the telephone away from the 

receiver.

  2.   Consult the dealer or an experienced 

radio/TV technician for help.

Any changes made by the user not approved by 
the manufacturer can void the user’s authority to 
operate the telephone.

Requirements of Part 68— 

FCC Rules

This equipment complies with Part 68 of the FCC 
Rules and the requirements adopted by ACTA. 
On the bottom of this telephone is a label that 
contains, among other information, a product 
identifier in the format US:AAAEQ##TXXXX. If 
requested, this number must be provided to 
the telephone company. The USOC Jack for this 
equipment is RJ11C.
A plug and jack used to connect this equipment 
to the premises wiring and telephone network 
must comply with the applicable FCC Part 68 
rules and requirements adopted by ACTA. A 
compliant telephone cord and modular plug are 
provided with this telephone. It is designed to be 
connected to a compatible modular jack that is 
also compliant. See installation instructions for 
details.
The Ringer Equivalence Number (REN) is used 
to determine the number of devices that may be 
connected to a telephone line. Excessive RENs 
on a telephone line may result in the devices 
not ringing in response to an incoming call. In 
most but not all areas, the sum of RENs should 

not exceed five (5.0). To be certain of the number 
of devices that may be connected to a line, as 
determined by the total RENs, contact the local 
telephone company. For products approved after 
July 23, 2001, the REN for this product is a part 
of the product identifier that has the format 
US:AAAEQ##TXXXX. The digits represented by 
## are the REN without a decimal point (e.g., 03 
is a REN of 0.3). For earlier products, the REN is 
separately shown on the label.
If this telephone causes harm to the telephone 
network, the telephone company will notify you 
in advance that temporary discontinuance of 
service may be required. But if advance notice is 
not practical, the telephone company will notify 
the customer as soon as possible. Also, you will 
be advised of your right to file a complaint with 
the FCC if you believe it is necessary.
The telephone company may make changes in its 
facilities, equipment, operations, or procedures 
that could affect the operation of the equipment. 
If this happens, the telephone company will 
provide advance notice in order for you to 
make the necessary modifications to maintain 
uninterrupted service.
If trouble is experienced with this equipment, for 
repair or warranty information, please contact 
Teledex at (800) 462-9446. If the equipment 
is causing harm to the telephone network, 
the telephone company may request that you 
disconnect the equipment until the problem is 
resolved.
There are no user-serviceable parts contained in 
this equipment.
Connection to party line service is subject to 
state tariffs. Contact the state public utility 
commission, public service commission, or 
corporation commission for information.
If your home has specially wired alarm equipment 
connected to the telephone line, ensure the 
installation of this product does not disable your 
alarm equipment. If you have questions about 
what will disable alarm equipment, consult your 
telephone company or a qualified installer.
This telephone is hearing aid compatible.

Summary of Contents for DIAMOND SERIES















Reviews: