Clear Voice Repeater Installation and Operation manual
Telecom Technologies (USA) LLC
www.cellboosterstore.com
antenna (3 in image above) should be placed central to your
home/office in order to maximize coverage. The directional panel
antenna (2 in image above) should be outside your home/office, facing
towards the closest cellular tower and with as few obstructions
(buildings, cars, trees etc) directly in front of it as possible – an elevated
position often helps this. More information on the placing of the
directional antenna is provided below.
Step 1 – Locating the Cellular Signal
The best way to find the best cellular signal around your
home/office is simply to walk around with your cell phone
on. You should use a cell phone on the network/band
whose signal you are trying to improve. The “Signal
Strength” meter on your cell phone will tell you where the
signal is strongest. Note: The Cell Phone “Signal
Strength” meter takes up to 30 seconds to update as
you move from location to location, so make sure to
take a nice long pause in every location you test. The
place you choose should either be outside, or in the very
least by a window. It should also be within 30 feet of
where you want to rebroadcast the cellular signal (this is the length of the
provided cable).
Step 2 – Set up the Cellular Repeater
Once you have established what part of your home has the best signal, you
will need to set up the Clear Voice Repeater.
1. Place the panel antenna in the place with the best signal and connect it
to the 30 foot cable.
2. Connect the other end of the cable to the connector on the bottom side
of the Clear Voice Amplifier Unit (marked “BTS”).
