Teleco UST DK User Manual Download Page 86

Page: 86 / 126

Control Buttons

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

UST DK Electronic Telephone

(continued)

Speed dial number check and memo dialing (see “Retrieve and Auto
Dial Lost Calls” on Page 78).

Caller ID/ANI/DNIS information mode OFF (see “Caller ID/ANI/DNIS
Information Mode” on Page 76).

Caller ID/ANI/DNIS information mode ON (see “Caller ID/ANI/DNIS
Information Mode” on Page 76).

Caller ID/ANI/Lost Call stored information display (see “Retrieve and
Auto Dial Lost Calls” on Page 78).

View Call Park Orbit list (see “Call Park Orbit List Display” on Page 77).

Remote called station messaging (see “Group Notification Station
Messaging” on Page 86).

Remote calling station messaging (see “Notification Station
Messaging” on Page 84).

♦

Changes Busy Field groups.

♦

Changes displays (date/time, elapsed time,
message, call forward, dialed number).

♦

Scrolls through speed dial numbers when in
Mode 8.

♦

Scrolls through message waiting numbers.

♦

Scrolls through the speed dial digits (if more than 16 digits) when in Mode 8.

Table 26

Control Button Definitions

(continued)

Button

Definitions

MAY 24 MON 12: 05

NO. 204

Summary of Contents for UST DK































































































































Search results

Summary of Contents for UST DK

Reviews:

Related manuals for UST DK

Brands by name

Popular brands

Teleco UST DK, User Manual

Search results

Summary of Contents for UST DK

Reviews:

Related manuals for UST DK

Brands by name

Popular brands