2
GSM led
Meaning
Quick flash
Startup of the module (about 30 sec. at the first power-on)
ON (solid)
No GSM signal
4 slow flashes and a pause
Excellent GSM signal
3 slow flashes and a pause
Good GSM signal
2 slow flashes and a pause
Sufficient GSM signal
1 flash and a pause
Poor GSM signal
Quick flashes then ON (
solid)
No SIM card
Slow flashing
SIM card has the PIN code activated
4 - COMMAND BY CALL
By means of a free phone call, it’s possible to activate the outputs.
In order to use this function it is necessary to memorize the telephone number in the GSM receiver.
4.1 - Memorizing/deleting a telephone number for COMMAND BY CALL
1. Press
once
the programming button,
PROG led
flashes then it turns ON.
2. Within 30 seconds make a call; when
the GSM module receives the call
PROG led
quickly flashes.
3. Hang-up.
< 30 s
PROG
LED
Memorizing a number
1. Press
twice
the programming
button, PROG led
slowly flashes
.
2. Within 30 seconds make a call
from the number to disable; when
the GSM module receives the call
PROG led turns off.
3. Hang-up.
4.2 - Deleting ALL the telephone numbers
Deleting a number
Press
3 times
and hold the programming button down for at least
10 seconds
; during this lapse PROG LED will
flash intermittently and quickly, until it will turn constantly on. At the end release the button.
Note:
It is possible to memorize or delete a telephone number even with SMS commands.
PROG
LED
(10 s)
P1
...
P1
P1
...
< 30 s
P1
P1
P1
PROG
LED
...
2 - Preliminary check
• SIM card must be active and having credit.
• PIN code and the answering service MUST be disabled.
•
Do not activate any other additional services, like the incoming calls filter or number masking.
We suggest to try the correct functioning of the SIM by means of a standard mobile phone before starting the
installation of the product.
3 - Installation
• Insert the SIM in the proper slot of GSM receiver.
• Install the aerial for the GSM signal reception.
• Switch the product on.
• Wait about 30 seconds for the initial startup and the connection to GSM signal.
Connection led
quickly flashes during the GSM signal research, then slower once the connection is ready.
GSM led
shows the quality of the connection and possible errors:
Summary of Contents for GSM700
Page 7: ......
