Teleco Flat Sat Elegance, User Manual

Page: 18 / 36

17
Operation of the Kit with Black Box and Sat Decoder (without Teleco TV)
Turning on the Flat Sat Elegance
To turn on the Flat Sat Elegance system, press the button (1) for about 1 second. This will
turn on the Black Box and the Sat Decoder of the Kit and start the initializing operations. The
TV will be switched on via its remote control as it is not part of the Kit.
Selecting the satellite
The available satellites are listed in the selection menu. The name of the selected satellite
is highlighted in the middle of the screen. A box with animated antenna provides information
on the search status. The user can change the satellite by pressing the key (8).
1
If the highlighted satellite is the one you have chosen, no further selection is needed; after
a few seconds the antenna will start rotating to indicate beginning of the search stage. You
can even change the satellite during a search, or after tracking has been performed, always
pressing the key (8).
8