TH-EU KVM Extender
40
2012-02-27
6
Operation
Pos : 35 /806-IHSE/Betrieb/Laden von DDC-Infor mationen/472- xx @ 6\mod_1304495057211_6.doc @ 50542 @ 2
6.1
Download of DDC Information
1. Please make sure that the monitor is on (both monitors in case of
Dual-Head devices).
2. Disconnect the monitor cable from the CON Unit and connect the
monitor cable again (In the case of Dual-Head devices, disconnect
and connect monitor cables successively).
The DDC information will be read from the console monitor,
transmitted to the CPU Unit and stored there internally.
To show successful reprogramming the LED Video “OK” flashes at
both CON Unit and CPU Unit for about one second.
The CPU will now be able to read the actual monitor DDC information
and so allow the required video resolution to be selected.
Pos : 36 /806-IHSE/Betrieb/Switc hbetrieb/472- xx @ 6\mod_1304495129258_6.doc @ 50561 @ 2
6.2
Switching Function (option)
If your KVM Extender has a built in switching function as an option, two
sources (computer, CPU) can be connected to the CPU unit. You can
switch at the CON unit between two sources (Computer, CPU) via
keyboard command.
1. By executing the 'Hot Key', the KVM Extender is set into command
mode.
2. If you want to switch the console to of one of both CPUs that are
available, you will have to enter the port number of the respective
CPU (1 or 2). Afterwards you have to confirm the switching with the
<Enter> key. The console is now switched to the respective CPU.
_6.doc @ 42096 @ 1
