8
TX Front Panel Indicators
Power
The POWER LED illuminates RED when 12-18 VDC mains power
is applied at either of the rear 4-pin inputs. The LED changes to
GREEN when the unit is turned on.
Each BNC input has a single LED that indicates the following:
Signal
RED
No Data present
GREEN
SDI
Data
present
RX Front Panel Indicators
Power
The POWER LED illuminates RED when 12-18 VDC mains power
is applied at either of the rear 4-pin inputs. The LED changes to
GREEN when the unit is turned on.
Each BNC output has a single LED that indicates the following:
Signal
RED
No Optical link
RED/GREEN
Flashing indicates good optical link
GREEN
SDI Data present
In addition, the RX features a 4-segment LED display and a toggle switch that
allows you to see the software revision number on the unit, the received optical
power of EACH input and the internal ambient temperature of the frame.
By moving the toggle switch to the right, you may select any received channel.
Figure 4: using the toggle to change channels to be monitored
