Telebyte 458-LM-E1-36-TP100 Reference Manual Download Page 3

 

Customer Care 

Warranty 

One-year Warranty

 

• 

Telebyte will furnish parts and labor for the repair or replacement of products found by Telebyte to be defective 

in material or workmanship during the warranty period.1 
 

 

Extended Customer Care 

 

Refer to the Customer Care section of the Telebyte web site for the most current information on extended 

warranty and calibration contracts 

2,3,4:

 

http://www.telebytebroadband.com/customercare.html

 

 

Disclaimer of Warranties and Other Terms and Conditions 

1

 

TELEBYTE, INC. warrants its broadband simulation equipment to be free from defects in material and workmanship, under normal and proper use 

and in its unmodified condition, for 12-

months, starting on the date it is delivered for use. TELEBYTE’S sole obligation under this warranty shall be to 

furnish parts and labor for the repair or replacement of products found by TELEBYTE to be defective in material or workmanship during the warranty 
period. Warranty repairs will be performed at the point of manufacture. Equipment approved for return for warranty service shall be returned F.O.B. 
TELEBYTE  factory  and  will  be  redelivered  by  TELEBYTE  freight  prepaid,  except  for  non-continental U.S.A.  locations. These  deliveries  will  be  sent 
COD freight and import/export charges. 

 

The customer is responsible for freight and customs charges when shipping products to and from Telebyte for calibration services.

 

You must purchase the extended warranty at the time of purchase or during the initial warranty period.

 

You must  purchase  the calibration  contract  at  the  time  of  purchase  or  during  the initial  warranty  period.  The  above  warranty  is  in lieu  of  all  other 

warranties,  expressed  or  implied,  statutory  or  otherwise,  including  any  implied  warranty  of  merchantability  or  fitness  for  a  particular  purpose. 
TELEBYTE shall not be liable for any damages sustained by reseller or any other party arising from or relating to any equipment failure, including but 
not limited to consequential damages, nor shall TELEBYTE have any liability for delays in replacement or repair of equipment.

 

 

Summary of Contents for 458-LM-E1-36-TP100












Reviews: