TeleAdapt PowerHub USB
|
Installation Guide
12
Additional Information
Overload Protection
The PowerHub USB has overload protection which cuts power to the
front sockets and USB if an overload occurs.
Before resetting please make sure the equipment that caused the
overload is no longer connected.
To reset press the small button located just above the USB sockets
on the front of the unit.
USB Charging
The PowerHub USB provides 2 USB charging ports on the front of
the unit. The left hand USB is suitable for tablets and mobile phones
and can provide 2.4A at 5V. The right hand USB is suitable for
mobile phones and can provide 1A at 5V.
Removing the PowerHub USB from Furniture
If you need to remove the equipment for any reason, first ensure the
equipment is disconnected from the mains power source.
1. Unplug the PowerHub USB from the mains supply.
2. Use a medium flat blade screwdriver to release 2 clips on the
bottom of the trim.
3. The trim can now be gently removed by hand. Be careful not to
bend the trim excessively or it may deform or break.
4. Unscrew the 4 cross head screws and carefully withdraw the unit
from the furniture being careful not to damage any cables.
Warranty
Please see TeleAdapt “Sales Terms & Conditions” which are available
at http://www.teleadapt.com/teleadapt/ sales-terms-conditions.html
Summary of Contents for TA-7535
Page 2: ...PowerHub USB TA 7535 HHSLQJ RXU RUOG RQQHFWHG...
Page 3: ......
