TeleAdapt MediaHub Mini
|
Installation Guide
10
Step 2
Ensure all cabling required (HDMI, USB Mini-B plug (if used), serial
RJ45 (if used) and DC power are presented at the cutout and that
you have sufficient slack to allow connection to the rear connectors
on MediaHub Mini main unit.
Ensure the PSU is NOT plugged into
the mains at this point.
NOTE: The PSU should be sited such that it is well ventilated and
can be easily serviced or replaced in the event of failure.
Step 3
Remove the MediaHub Mini main unit, the PSU and trims from
the box.
Step 4
Connect the HDMI cable from the TV to the HDMI socket on the
rear of the MediaHub Mini. If the furniture thickness exceeds
18mm you may need to use the additional 75mm HDMI stub
adaptor which is more flexible than a standard HDMI cable. To
ensure no excessive strain is placed on the socket it is important
that the HDMI cable is securely fastened to the small plastic loop
on the rear on the MediaHub Mini using the supplied cable tie.
Step 5 (applies for USB passthrough only)
If using USB passthrough, remove the yellow Mini-USB charging
converter from the Mini-B USB socket on the rear of the MediaHub
Mini. Next connect a USB cable from your USB host to the Mini-B
USB socket on the rear of the MediaHub Mini. This USB connection
is passed to the USB socket on the front of the MediaHub Mini which
is marked with a single lightning bolt.
