TS6212
3
2 Product description and connections
2.1 Front panel
1.
ON / Standby (ST.BY) button.
2.
▼
Previous channel.
3.
▲
Next channel.
4.
IR
Infrared sensor for remote control.
5.
LED :
if lit on the receiver is in Standby mode, if lit off the the receiver is in operative mode
2.2 Back panel and connections
CAUTION!
It is good practise to connect the appliance to other devices (e.g. TV, VCR, HI-FI, etc.) and the antenna before
plugging in into the main power supply. When the receiver is powered electrical voltage differences may be created
when plugging in the jacks, which may generate currents that could damage the devices.
The direct TV Scart connection should always be used as a first operating test since other more complex connection
sequences could lead to malfunctions that are not caused by faults and/or defects of the actual devices but by
problems of incompatibility.
1.
RF IN
Antenna signal input.
2.
RF LOOP THROUGH
Loop through antenna signal to TV.
3.
SPIDF
Coaxial digital audio output for home-theatre amplifiers.
4.
VCR
Scart connection for video recording.
5.
TV
Scart output connection for TV.
6.
CABLE
Integrated power cable for connection to a
230 Volt AC, 50Hz
power socket.
7.
ON/OFF
on/off switch
