Tele System TS6006, Manual, Page: 13 / 17

TELE System TS6006
22
22 22
22
E
n
g
lis
h
A flow chart of the menu:
Main menu
▼
Channel
▼
Installation
▼
Setup
▼
Tools
▼
Media+
▼
TV Channel List
Radio Channel List TV
Channel Recycle list
Radio Channel Recycle
List
Delete All Favorites
Delete All
Group Rename
Auto Scan
Channel Scan
Tuner Setting
OSD Language
TV System
Region and Time
Timer Setting
OSD Setting
Parental Lock
Auto Standby
Receiver Information
Game
Load Factory Default
Software Upgrade
Standby Auto Upgrade
setting
Media Player
Record Manage
Removable Disk
Information
DVR Configuration
Safety Remove Storage
Device
Disk format
9 Problem solver
PROBLEM POSSIBLE CAUSE REMEDY
1. The receiver does not start -The power adapter is not plugged in.
-Power adapter plugged in, but the
receiver still does not work.
-Make sure the power adapter is
properly plugged in.
- Unplug the power adapter and
check it for damage (risk of electric
shock!).
2. No LED lights up -IR sensor/LED device is not plugged in. -Make sure the power adapter is
plugged in completely.
2. No Video or Audio signal -SCART not connected properly.
or antenna cable
-Audio volume low or zero.
-AV channel not selected on TV.
3. The channel scan gives no results -No or bad antenna signal.
-Your antenna system is not compliant
with the digital terrestrial signal.
-You have an active antenna.
4. The settings are not saved. -Setting changes are not confirmed
before quitting.
5. The remote control does not work. -The remote control is not being directed
towards the receiver.
-The remote control battery is flat.
-The remote control has been dropped
and its internal components have been
damaged.
-Check the SCART connection,
-Make sure the TV and receiver
volumes are not set to zero.
- Make sure the AV channel is
selected on the TV (consult the TV
user manual).
-Check the antenna installation and
signal quality.
-Manually scan for channels.
-Ask for an antenna technician help.
-Check the
“Antenna Setting” (refer
to chapt. 3, point 4).
-Before quitting a menu press the
Confirm button to save the changes.
-Make sure nothing is obstructing the
IR sensor.
-Change battery.
-Contact the local dealer and buy a
new remote control.
6. You have forgotten the Password. -The default password is 0-0-0-0
(four zeros). If you have changed
password consult this manual at
section 4.1.
7. The event timer function doesn't work
properly.
9. The receiver does not interact with
the remote control buttons.
-The specific program transmits a wrong
time information.
-The receiver time has not been set
correctly
-The receiver is temporarily blocked.
-There is a problem with the
remote control.