6
•
Component input (YPbPr, adapter required)
•
RCA Video + Audio input (AV, adapter required)
•
Common Interface slot (compatibile with CI+ module)
•
USB port (Media Player Function)
•
HDMI
Connections
1.4
Antenna connections/cable TV channel
To view the television channels, you can connect the TV to one of the following
devices:
A terrestrial antenna and/or a satellite antenna system.
In either case, connect the antenna cable (75 Ω) to the coaxial jacks located in the rear
of the TV.
1.5
Connection to an external device
Via SCART:
make sure that both the TV and the device are turned off. Connect the
SCART cable from the source to the TV. Turn on the two devices.
Press the
Source
button on the remote control and select SCART.
Via RCA:
make sure that both the TV and the device are turned off. It is necessary to
use an RCA/Jack3.5mm adapter to connect the device to the AV/RCA input. Turn the
two devices on. Press the
Source
button on the remote control and select AV as the
source.
Via YPbPr (Component):
make sure that both the TV and the device are turned off. It is
necessary to use an RCA/3.5mm jack adapter to connect the device to the AV/RCA,
respecting the colors as per the following instructions:
Yellow - Green
Red - Red
White - Blue
Turn on the two devices.
Press the
Source
button on the remote control and select YPbPr.
Via HDMI:
make sure that both the TV and the device are turned off. Connect the cable
from the source to the TV. Turn on the two devices. Press the
Source
button on the
remote control and select HDMI.
