Tele System All in One 58040107, Quick Manual

Page: 10 / 64

ALL.IN.ONE
8
7
7 7
7 Problem solving
Problem solving Problem solving
Problem solving
PROBLEM PROBLEM PROBLEM PROBLEM POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE REMEDY REMEDY REMEDY REMEDY
The remote control
does not work. (1) The appliance is in Stand-by.
(2) The remote control is not being
directed towards the receiver.
(3) The remote control batteries
are flat.
(4) The batteries have been
inserted in the wrong direction.
(5) The remote control has been
dropped
and its internal
components have been damaged.
(6) Wrong remote control mode in
use.
(1) Press the STAND-BY
button on the appliance to
check if the device is
working properly.
(2) Make sure nothing is
obstructing the front panel.
(3) Change batteries.
(4)
Check the battery
polarities.
(5) Contact the local dealer
and buy a new remote
control.
(6) Press STB or TV button
and check the response of
the box.
Some buttons do not
work (1) Buttons are not pre-
programmed.
(2) Buttons has been programmed
by learning function and later an
TV or STB code has been set.
(1) Program the buttons by
using the learning function
or map recall
(2) Perform a reset of the TV
and/or STB auto learnt keys
(ref. 5.5 and/or 6.5)
CAUTION
CAUTION CAUTION
CAUTION
Because of the large number of TV equipment available in the market, it is not possible to
guarantee the compatibility with all devices.