Installation instructions
│
T24
│
Chapter 9: Configuration menu
9.1 6 S how the device inf ormation
Display the transmitter's series number and CPU versions.
To see the transmitter's information:
1. Make sure that the
Stop
button is pressed.
2. Twist and release the
Stop
button.
The initial start-up logo is displayed.
Battery indicator(s) light(s).
The
display shows:
[Session Selection]
3. Enter
Menu mode
(see
"9.2 Enter Menu mode (no PIN code required) "
).
4. Navigate to the
[Show device information]
menu using the
Up/Down
buttons.
5. Press the
Select
button to enter.
The display shows:
[S/N: HY-TXXXX]*
[CPU01: XXXX]
**
…
* S/N = serie number; HY= Tele Radio AB's internal product code; TX= transmitter
** CPU01–08: Id number of the software currently used in each of the transmitter's
CPU cards.
68
IM-PM-TX101-EN-v08
