4.10.3 FCC Part 68 Notice
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
At the bottom
of
this equipment, there is a label that contains, among other information, a product identifier [US:
TLDDL01BTLDPV00A1]. If requested, this number must be provided to the telephone company.
If this equipment [Enterprise Router] causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the tele-
phone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to
make necessary modifications to maintain uninterrupted service.
If you experience trouble with this equipment, disconnect it from the network until the problem has been corrected or
until you are sure that the equipment is not malfunctioning.
Please follow any instructions for repairing that were provided (e.g. battery replacement section). Otherwise, do not
alternate or repair any parts of the device that were not specified.
If the telephone company requests information on what equipment is connected to their lines, inform them of:
(a) The telephone number that this unit is connected to,
(b) The ringer equivalence number [01B]
(c) The USOC jack required [RJ11C], and
(d) The FCC Registration Number [TLD]
Items (b) and (d) are indicated on the label. The ringer equivalence number (REN) is used to determine how many
devices can be connected to your telephone line. In most areas, the sum of the RENs of all devices on any one line
should not exceed five (5.0). If too many devices are attached, they may not ring properly.
4.10.3.1 Service Requirements
In the event of equipment malfunction, all repairs should be performed by our Company or an authorized agent. It is
the responsibility of users requiring service to report the need for service to our Company or to one of our authorized
agents. The contact information can be found at:
http://www.part68.org/tteDetails.aspx?id=95190
4.11 IC Statement
4.11.1 CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ-
ing interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de li-
cence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est suscept-
ible d'en compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is
not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités.
Sélection d'autres canaux n'est pas possible.
Teldat S.A.
4 Compliance
Teldat V Router
25