Fig. 19:
LAN switch ports
4.2.4 WWAN Antenna connections (RF connectors)
Some Regesta Smart PRO router models have two RF antennas connectors. The antennas are assembled and dis-
mantled by screwing/unscrewing them into/from the connectors labeled RF1/RF2 (located on the connector panel of
the device).
The RF1 connector is connected to the module’s MAIN connector, while the RF2 connector is linked to the AUX con-
nector.
Using these antennas in the Regesta Smart PRO router improves the quality of the signal received and transmitted
by the WWAN module.
Some cellular technologies use the antenna diversity technique to improve the quality of the signal received
(HSUPA, LTE, etc.). For this reason, the Regesta Smart PRO incorporates two WWAN/RF connectors. Regardless
of the configuration, the antenna on RF1 must always be installed while the RF2 one is optional.
Teldat S.A.
4 Connecting the router
Regesta Smart PRO
23
