router.
The LEDs are organized on the router front panel (see the following figure):
Fig. 3:
Front panel LEDs
While the device is in startup mode, LED L lights up in green. Once start up is complete, the LEDs indicate the fol-
lowing:
Front panel LEDs table
LED
Associated interface
Status
Description
S
Cellular interface corresponding to
the active SIM.
Green
Amber
SK1 operating SIM. This processes
traffic through the carrier for the SIM
installed in this tray.
SK2 operating SIM. This processes
traffic through the carrier for the SIM
installed in this tray.
C
Cellular interface corresponding to
the active SIM.
Red
Amber
Green
Cellular interface is not available, not
installed or not registered.
The device has registered in the net-
work and is establishing the PPP pro-
tocol.
The device is registered, PPP is es-
tablished and it can send IP traffic
through the PPP interface.
- Steady: data is not being trans-
ferred.
- Blinking: data is being transferred.
L
Cellular interface corresponding to
the active SIM.
Green
Yellow
Red
Off
Coverage level above -90dBm.
Coverage level between -90dBm and
-100dBm.
Coverage level below -100dBm.
Cellular interface is not active.
100
Associated to each Ethernet switch
connector (LAN1…LAN6).
Amber
ON -> Connection at 100Mbps.
OFF -> Connection at 10Mbps.
LNK
Associated to each Ethernet switch
Green
ON -> Ethernet connection (link) es-
Teldat S.A.
3 Components and Power Supply
Regesta-PRO ER B Router
5
