![Teldat Regesta Lite AU Installation Manual Download Page 15](http://html1.mh-extra.com/html/teldat/regesta-lite-au/regesta-lite-au_installation-manual_1079543015.webp)
3.3.4 Connecting
• Make sure that the router’s power supply switch is in the OFF position (0).
• Ensure that the power supply is NOT connected to either the electricity or the
router.
• Connect all data cables.
• Connect the power supply cable to the device.
• Connect the power supply cable to the electricity supply.
• Place the router’s power supply switch in the ON position (1).
• Lower the transparent protector.
3.3.5 Disconnecting
• Raise the transparent protector.
• Make sure that the router’s power supply switch is in the OFF position (0).
• Disconnect the power supply from the electricity supply.
• Disconnect the power supply from the router.
• Disconnect the data cables.
Fig. 10:
Power Supply Connector
The connector has 3 terminals, 2 for powering, and another, labeled ground, that connects the device to the ground
point where the rest of the devices are connected. Although the label indicates a positive terminal/line and another
negative/neutral, the device can be connected to the power source with reverse polarity.
To connect the power to the device, please follow the steps set forth in
Connecting
on page 11: check that the power
switch is in the OFF position (0) and that the power source is NOT connected to the electricity network; find the
Power Supply connector (located on the front panel) and insert the power cable connector.
3.4 RST Button
The Regesta Lite AU router has a button that can be accessed from the outside and is labeled “RST”. It is located
on the front panel and has two functions.
• To trigger a restart.
• To restart the device with the default configuration. The default configuration has IP 192.168.1.1 assigned to all
switch ports.
The external button is physically protected, so it cannot be accidentally pushed. You need a sharp-edged object to
activate it.
3.4.1 Restarting the device
Follow the steps below to restart the device:
(1)
Press the RST button. Device restart is indicated by the 3 LEDs on the front panel lighting up in amber.
Teldat S.A.
3 Components and Power Supply
Regesta Lite AU
11