Teldat elmeg IP130 User Manual Download Page 13

Page: 13 / 165

elmeg IP130 / en / elmegIP130_v1 / starting.fm / 30.08.2012

rsion 2, 27.0

.2010

elmeg IP130

Teldat

First steps

Setting up and connecting the device

The phone is designed for use in dry rooms in a temperature range of ±0°C to +45°C.

Set up the phone at a central point where a connection to the local network is available.

Firmware update

Whenever there are new or improved functions for your Teldat, firmware updates are made
available for you to download to your phone (

Page 130

). If this results in operational changes

to your phone, a new version of this user guide or the necessary amendments are published on
the Internet at www.teldat.de.
Select the product to open the relevant product page for your telephone, where you will find
a link to the user guide.

To find out what version of firmware is currently loaded on your phone, see

Page 132

Warning

Never expose the elmeg IP130 to the following:
heat sources, direct sunlight or other electrical appliances.

Protect your Teldat from moisture, dust, corrosive liquids and fumes.

Summary of Contents for elmeg IP130






































































































































































Search results

Summary of Contents for elmeg IP130

Reviews:

Brands by name

Popular brands

Teldat elmeg IP130, User Manual

Search results

Summary of Contents for elmeg IP130

Reviews:

Brands by name

Popular brands