background image

elmeg IP120 / en / elmegIP120_v1 / settings.fm / 01.08.2012

V

e

rsion 2, 27.0

5

.2010

57

elmeg IP120

Teldat

Configuring basic settings

Resetting the device to the default settings 

If you give your device to a third party or change workstation, you can delete your individual 
settings and data by resetting the device to the factory settings. All system settings are reset to 
the default settings. User-specific data is deleted. 

This means that network configurations, VoIP accounts, directories, call lists, data in the resource 
directory and all of your individual settings are deleted or reset to the factory settings.

You need the administrator password before you can use this function (

£

page 93

). 

 

¢

Settings 

¢

Reset

~

Enter the administrator password.

§§OK§§

Press the display key. The password is verified.
If the password is correct, you must now confirm the operation.

§§Yes§§

Press the display key. The device is reset to the factory settings.

Resetting via device button

You can also reset the device by using the reset button on the underside of the device. 

The reset button is located behind the small open-
ing labelled 

Reset

. Use a pointed item, e.g., a paper 

clip. 

¤

Reset: Press and hold the button for at least 
5 seconds to return all settings to the factory set-
tings.

Reset Button

Summary of Contents for elmeg IP120



































































































































Reviews: