elmeg IP140 / en / elmeg140_v1 / connectivity.fm / 09.04.2014
V
e
rsion 2, 27.0
5
.2010
87
elmeg IP140
bintec elmeg
Configuring settings for the local network
Selecting a WLAN manually
Entering the network key
The WLAN settings are complete.
You can now save the settings with the display key
§§Save§§
if:
u
You use IPv4 as the
Network Type
,
u
Your phone automatically acquires an IP address via a DHCP server in the network.
The device creates a connection to the wireless network access point and requests an IP
address. You can access the wireless network as soon as the address is assigned. The Web con-
figurator can now be accessed via a PC, where you configure further settings, e.g., your VoIP
accounts (
In the following instances, the network configuration is not yet complete and further settings
must be made:
u
Network with IPv4 and static IP address (
u
IPv6 network (
It is possible to avoid sending the SSID
and therefore hide the WLAN. Such
WLANs cannot be found during a net-
work search. If the WLAN that you want to
connect to prevents the SSID from being
sent, you will have to connect manually.
~
Enter the network name (SSID) for
the required WLAN.
Wireless networks are encrypted to pre-
vent unauthorised call screening.
Ask your network administrator for the
encryption code.
~
Enter the network key.
Local Network
Û
Save
WLAN:
<Manual Entry>
Network Name (SSID):
V
elmeg |
Network Key:
IP Address Type:
Local Network
Û
Save
WLAN:
Company Network
Network Name (SSID):
V
Company Network
Network Key:
elmeg1234
IP Address Type:
