elmeg IP140 / en / elmeg140_v1 / connectivity.fm / 09.04.2014
V
e
rsion 2, 27.0
5
.2010
82
elmeg IP140
bintec elmeg
Configuring settings for the local network
Preferred DNS Server:
Enter the IP address for the preferred DNS server. DNS (Domain Name System) allows you to
assign public IP addresses to symbolic names. The DNS server is required to convert the DNS
name into the IP address when a connection is being established to a server.
You can specify the IP address for your router/gateway here. This forwards address requests
from the phone to its DNS server.
There is no default setting for a DNS server.
Alternate DNS Server:
Enter the IP address for the alternate DNS server that should be used in situations where the
preferred DNS server cannot be reached.
¤
Once all the settings are complete, press the display key
§§Save§§
to save the configuration set-
tings.
IPv6 configuration
IP Address Type:
r
Select
Automatic Scan
if your device
receives the IP address via a DHCP server.
Select
Static
if your device receives a fixed
IP address.
If the
Automatic Scan
setting is selected, all fur-
ther settings are automatically configured. They
are displayed here and cannot be changed.
If you have selected
Static
as the address type,
you must now create the following settings:
– IP Address
–
Prefix Length
and
– Preferred DNS Server
– Alternate DNS Server
Ask your network administrator for your net-
work settings.
Local Network
Back
Save
IP Address Type:
Automatic Scan
IP Address:
V
2001:b021:198:0:205:5dff:fe6b:87
Prefix Length:
64
Preferred DNS Server:
Local Network
Back
Save
IP Address Type:
Static
IP Address:
V
2001:b021:198:0:205:5dff:fe6b:87
Prefix Length:
64
Preferred DNS Server:
