elmeg DECT200 Multicell System / en / elmegDECT200M_en / introduction.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
7
elmeg DECT200 Multicell System
bintec elmeg
Introduction
u
elmeg handsets
– Up to 100 handsets can be connected and 30 DECT connections can be made
simultaneously (calls, e-mail checks, connections to online directories and the Info
Centre).
The following handsets are recommended: elmeg DECT 130 and elmeg DECT 140.
Further information relating to the functions of the handsets in connection with the
elmeg base stations can be found on the
Service
page at www.bintec-elmeg.com on the
Internet.
– Subscribers can accept or initiate calls in all DECT cells with their handset (
), and
can also switch between the DECT cells during a call (
). A handover is only
possible within the same cluster.
Configuring handsets
The functions of a handset on a elmeg DECT200 Multicell System are described in this
document using the example of the elmeg DECT 130 handset. Detailed information about
this handset and other approved elmeg handsets can be found in the relevant user guide.
These are provided on the product CD or on the Internet at www.bintec-elmeg.com.
u
PABX
You can connect your DECT telephone system to a PABX for VoIP, ISDN or analogue
telephony, e.g.,
– A PABX from the elmeg hybird family
– A PABX from another manufacturer
– A PABX over the Internet (hosted PBX)
The PABX
– Establishes the connection to a public telephone network
– Enables central management of telephone connections, directories, network mailboxes
u
Forming clusters with the elmeg DECT200 Multicell System
You can divide DECT base stations that you have installed at your location into several
independent groups, i.e., clusters, and manage them using one elmeg DECT200M DECT
Manager (
This means DECT domains that are a long way apart can be managed from a central point.
The DECT Manager is connected to the base stations and the PABX via the local network and
is therefore not dependent on DECT ranges. It guarantees access to the centrally configured
IP connections, directories etc. However, a handover of handsets between clusters is not
possible.
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
