elmeg DECT200 Multicell System / en / elmegDECT200M_en / settings.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
53
elmeg DECT200 Multicell System
bintec elmeg
System settings and settings on the handset
System settings and settings on the handset
System settings are made via the Web configurator on the DECT Manager (
cannot be changed using the handsets.
This applies in particular for:
u
Registering and de-registering the handset to the telephone system, handset name.
u
All settings for the VoIP account used by a handset for calls.
u
Settings for the network mailbox and the e-mail account.
u
Configuration of online directories.
Handset-specific settings are preset on your telephone. You can change these settings.
This applies, for example, for
u
Display settings, such as language, colour, backlight etc.
u
Settings relating to ringtones, volume, speaker profiles etc.
Information about this can be found in the user guide for the relevant handset.
Date and time
Date and time are set in the Web configurator of the DECT Manager (
) and are
synchronised system-wide on all base stations and elmeg handsets.
Synchronisation is carried out in the following cases:
u
If the date or time has been changed on the DECT Manager.
u
If a handset is registered to the telephone system.
u
If a handset is switched off and switched back on again, or is outside the wireless range of
the telephone system for more than 45 seconds and then comes back into range.
u
Automatically every night at 4.00 am.
You can change the date and time on the handset. This setting only applies for that handset and
will be overwritten when the next synchronisation takes place.
The date and time are displayed in the format set for that handset.
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
