elmeg DECT200 Multicell System / en / elmegDECT200M_en / web-conf.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
92
elmeg DECT200 Multicell System
bintec elmeg
Configuring the system on the DECT Manager
Device management
Date and time
By default, the DECT Manager is configured so that the date and time are transferred from a time
server on the Internet.
Changes to the settings for the time server and activating/deactivating the synchronisation are
done via the Web page:
Settings
¢
Management
¢
Date & Time
You can make the following changes:
u
Enter another time server
u
Deactivate the time server and enter the date and time manually
u
Select the time zone for your location
u
Activate/deactivate automatic adjustment of the clock to summer time
Additional device settings
This page
Settings
¢
Management
¢
Miscellaneous
allows you to configure additional device settings.
Changing the password for the Web configurator
You should change the password for registering with the WEB configurator for security reasons
(up to 20 digits; the default setting is
admin
).
Please note
If you have forgotten the password, you will have to reset the device to the factory settings.
Further information on this can be found in the
section
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
