Teldat BinTec Elmeg DECT200, User Manual

Page: 17 / 125

elmeg DECT200 Multicell System / en / elmegDECT200M_en / starting.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
16
elmeg DECT200 Multicell System
bintec elmeg First steps
Registering base stations
¤
Open the Web configurator and log in (
£
page 57 ).
¤
Open the Preferences
¢
Network and connectors
¢
Base station registration page
(
£
page 65 ).
The window shows a list of all DECT base stations connected to the local network which have
not yet been registered. The base stations are identified by their MAC address and by the
date and time of their initial contact with the system.
¤
Register all the base stations that are to belong to your telephone system, as described in
section "
Registering base stations ".
Synchronising base stations and forming clusters
¤
Open the Preferences
¢
Network and connectors
¢
Base station synchronisation page
(
£
page 68 ).
The registered base stations are displayed.
¤
Assign each base station to a cluster.
If you only want to manage one cluster, assign all the base stations to the same cluster
number.
¤
Assign the planned synchronisation level to each base station.
Be aware that synchronisation level one can only be assigned once.
¤
Save your settings.
Synchronisation starts automatically. If synchronisation is successful, this is indicated by the
DECT 1 / DECT 2 LEDs on the elmeg DECT200 base stations (
£
page 21 ).
Registering handsets and assigning VoIP accounts
All the handsets to be used for making calls on the elmeg DECT200 Multicell System must be
registered on the DECT Manager. When registering, the handset is permanently assigned a VoIP
connection as the receive and send connection.
Up to 100 handsets can be connected.
The following handsets are recommended: elmeg DECT130 and elmeg DECT 140.
Further information relating to the functions of the handsets in connection with the elmeg base
stations can be found on the
Service page at www.bintec-elmeg.com on the Internet.
Please note
For the integration of the elmeg DECT200 Multicell System in a elmeg hybird PABX please
notice the installation poster for the administrator (included).