Telcoma Automations FM420U, Operating And Programming Instructions, Page: 8 / 12

EN
9
EN
8
- Channel 00 repetition This new multi-channel control enables
programming of channel 00 so that it repeats transmission sequentially for
a set time interval.
This function is useful when channel 00 is optimised for centralised
commands, and repetition optimises reception of the radio signal.
Press key 5 to select
Press key 5 to confirm. The text appears briefly and the radio
control returns to normal operating status.
In this case (30) channel 00, after pressing a transmission key, is
transmitted at regular intervals for 30 seconds. On each
transmission, the text is displayed, followed by . Press
key 1 or 3 to interrupt transmission repetition.
To disable repeated transmission of channel 00, set in the
menu .
Use key 2 (indicated in the drawing) or 4 to scroll through values
00 to 40.
Select 00 to disable transmission repetition.
Select 10, 20, 30 or 40 to set the repetition interval in seconds.
- Firmware Version
Press key 5 to select . This displays a number corresponding
to the radio control firmware version.
BATTERY REPLACEMENT
To replace the battery, open the battery compartment and remove the
battery with the aid of a tool (for example the tip of a pen). Fit the new
battery taking care to observe polarity. See fig. 2 on page 2.
GUARANTEE
The present guarantee covers possible faults and/or irregularities due to
manufacturing defects and/or faults.
The guarantee will automatically decay in the event of tampering or mi-
suse of the product.
During the guarantee period TELCOMA srl pledge to repair and/or re-
place defective and non-tampered parts. The call charges, as well as
the collection, packaging and transportation costs of the product for re-
pair or replacement are at the clients full and exclusive expense.