35
Powering Down the Equipment
Section
6
Powering Down the Equipment
This section provides the following power-down topics:
•
Section
6.1
“TSBC-HW-SRV”
•
Section
6.2
“TSBC-HW-TRANS”
6.1
TSBC-HW-SRV
Attention
DO NOT TURN OFF the power to the TSBC-HW-SRV unless the Linux host has been
properly shut down beforehand. Use the reset button display, or manually use the
shutdown command.
Allow enough time for the Linux host to shut down before turning off the power (example.
1 minute). Be aware that the shutdown procedure of the unit is logged and traceable for
support and warranty purposes.
6.1.1
Local Method
To power down the TSBC-HW-SRV, refer to the Dell documentation:
•
TSBC-HW-SRV-HIGH:
http://www.dell.com/support/home/us/en/19/product-
support/product/poweredge-r630/manuals
•
TSBC-HW-SRV-MID:
http://www.dell.com/support/home/us/en/04/product-
support/product/poweredge-r330/manuals
6.1.2
Remote Method
To power down, you must connect to the management interface using SSH, and enter:
shutdown -hP now
6.2
TSBC-HW-TRANS
Unplug the power cord from the unit. The unit can be restarted using restart button on the front of the
unit.
Note
As an alternate method to this procedure, refer to
Section
5.2.2 “TSBC-HW-TRANS” on
page
33, to power down the TSBC-HW-TRANS with the reset button.
