TelcoBridges Tmedia TMG800, Installation Manual

Page: 30 / 80

22
TMG800 and 1 Installation Guide
2.5.1 Connecting to the Tmedia 1+1 System Management Interfaces
The Tmedia Management Interface enables administrators to perform management tasks on a Tmedia
1+1 system.
Prerequisites
To communicate with the Tmedia Management Interface, the following is needed:
• Two CAT5 Ethernet cables with RJ45 male-male terminations.
Interconnections
Within a 1+1 system there is a management interface for a TMG3200 and a T1, each
requiring a Gigabit Ethernet network link. See figure 2.9 on page 22.
To communicate with the Tmedia Management Interface:
1. Connect an RJ45 cable from the TMG800 to an Ethernet switch.
2. Connect an RJ45 cable from the 1 to an Ethernet switch.
Figure 2.9 Tmedia Management Interface
TMG800
Management Interface
Management Interface
Gigabit Ethernet Switch 1
1
Gigabit Ethernet Switch 2
1+1