800 Series Standalone and 800 Series 1+1 System Installation Guide
18
2.4.5
Powering Up
The 800 series gateway is furnished with two AC or DC power connections. Only once all other
equipment installation work is completed should the 800 series gateway be turned on.
2.4.5.1
Connecting to AC Power
Prerequisites
To power the 800 series gateway, you will need:
•
Two power sources.
•
Two power cables for the 800 series gateway.
To connect to AC Power:
1.
Connect an AC power cable to each AC connector of the 800 series gateway and an AC supply.
See
Note
It is important to connect both power supplies in order to avoid setting off the audible alarm.
Figure
2.6
AC Power Connection
AC
Power
Source 1
AC
Power
Source 2
15
14
13
12
10 11
8
9
3
2
0
7
6
5
4
1
MGMT0
MGMT1
ETH0
ETH1
VOIP0
VOIP1
Summary of Contents for 800 1+1 series
Page 1: ...Installation Guide 800 Series Gateway Standalone 800 Series Gateway 1 1 October 26 2015...
Page 37: ...31 Installing the Equipment 3 Once you confirm the changes a progress page is displayed...
Page 46: ...800 Series Standalone and 800 Series 1 1 System Installation Guide 40...
Page 54: ...800 Series Standalone and 800 Series 1 1 System Installation Guide 48...
