GB
4.10 Connecting the additional silencer
To further cut down the sound level of the
generating set, one can install an additional
silencer on the outside (code 05468).
The additional silencer kit (code 05422) consists
of a silencer (Fig. 17 ref. 1), a stretch of flexible
steel hose (Fig. 17 ref. 2), two clamps to fasten
the connections (Fig. 17 ref. 3). To connect the
silencer to the generating set, first take the spark
quenching unit (Fig. 18 ref. 1) off from the
terminal of the exhaust muffler inside the
generating set and use the clamp to fasten it to
the terminal of the outside silencer (Fig. 20 ref.
1).
Use a pair of pliers to take off both flaps (Fig. 19
ref. 1) closing the slot especially created to let
through the flexible pipe connecting the muffler
inside the generating set to the outside silencer.
Fasten the flexible pipe to the terminal of the
muffler and of the silencer as shown on Fig. 20.
The silencer is provided.
Do not use silencers which
were not provided by
. Silencers of the
wrong size can damage the engine.
15
17
16
18
19
20
Vers. 013
Energy 4000 B / 4000 GAS
13
