www.tekvox.com
MV41+
79141-MV User Manual
5. Front Panel Control
5.1 Multi-View Selection
By default, the switcher is set to quad-view, and the input-output correspondence is: Input 1-Window
A, Input 2-Window B, Input 3-Window C, Input 4, Window D. To change the multi-view mode, press
one of the other two multi-view buttons. The LEDs of the selected multi-view layout and
corresponding windows will light up blue.
To switch to full-screen, press one of the Windows A~D buttons to display the corresponding
window full-screen. While in Fullscreen mode, the LEDs of the selected input source and window will
light up blue, and the LEDs of all other window and multi-view mode buttons will turn off.
5.2 Video Signal Switching
5.2.1 In Multi-View Mode
Operation
:
Input #
+
Window #
Example
: Switch Input 1 to Window B
Press
Input 1
(the
Input 1
LED will turn blue, and the
Windows A~D
LEDs will flash), then press
Window B
(the
Windows A, C,
and
D
LEDs will go out, then the
Input 1
and
Window B
LEDs will flash
3 times, and then the
Input 1
LED will go out and the
Windows A~D
LEDs will turn blue).
5.2.2 In Full-Screen Mode
5.2.2.1 Manual Switching
Operation
: Input # + Window #
Example
: Switch Input 2 to Window A
Press
Input 2
(the
Input 2
LED will turn blue), then press
Window A
(the
Input 2
and
Window A
LEDs
will turn blue).
5.2.2.2 Auto-Switching
Press the
AUTO
button to enter Auto-Switching mode (the
AUTO
LED will turn blue). When in Auto-
Switching mode, the signal switching obeys the following principles:
1.
HDMI Input Priority
: HDMI 1 > HDMI 2 > HDMI 3 > HDMI 4; when an input source and output
window are connected, the corresponding LEDs will turn blue
2.
New Signal
: When the switcher detects a new input signal, the switcher will switch to the new
signal automatically
