Modular Matrix Switcher 16x16
22
No.
Detailed Information
1
1080p 2D 5.1CH
2
1080p 2D 2.0CH
3
720p 2D 5.1CH
4
720p 2D 2.0CH
5
4kx2k 2D 5.1CH
6
4kx2k 2D 2.0CH
Update in-built EDID data by sending command
UpgradeIntEDID[x].
.
Examples:
1
、
Transfer signals from an input channel to all output channels: [x]All.
Example: Send
“3All.”
to transfer signals from the input 3 to all output channels.
2
、
Transfer all input signals to corresponding output channels respectively:
All#.
Example: If this command is carried out, the status of matrix will be: 1->1, 2->2, 3->3,
4-
>4……
8->8
….
3
、
Switch off all the output channels: All$.
Example: After running this command, there will be no signals on all the outputs.
4
、
Switch off the detail feedback command from the COM port: /:MessageOff;
But, it will leave the “switch OK” as the feedback, when you switch the matrix.
5
、
Switch on the detail feedback command from the COM port: /:MessageOn;
It will show the detail switch information when it switch. Example: when switch 1->2, it
will feedback “A
V01 to
02”.
6
、
Transfer signals from an input channel to corresponding output channel:
[x]#.
Example: “5#.”
to transfer signals from the input5 to the output5.
7
、
Switch off an output channel: [x]$.
Example:
“5$.”
to switch off the output 5.
8
、
Switch signal: [x1] B[x2].
Example: “12B12,13,15.”
to transfer signal from the input12 to the output No.12,13,15.
9
、
Inquire the input channel to the output channel [x]: Status[x].
Example: Send
“Status3.”
to inquire the input channel to the output 3.
10
、
Inquire the input channel to the output channels one by one: Status.
Example: “Status.”
to inquire the input channel to the output channels one by one.
