www.tekvox.com
4K ePTZ Camera
79068-AT2 User Manual
6. Description of Recording and Broadcasting Host
6.1 Auto Tracking Control
The recording and broadcasting host sends a command to a network server when certain conditions
are met by the tracking camera. In auto-tracking mode, the camera cannot receive any control
commands. To control the camera
’s pan, rotation, or zoom manually via the web GUI or remote
control, auto-tracking must be stopped.
1. Network Receiving Address
The auto tracking camera
’s
default IP address is 192.168.5.163
2. Command
Action
Command
Start teacher tracking
0x810x0A 0x08 0x01 0x020xFF
Stop teacher tracking
0x81 0x0A 0x08 0x01 0x03 0xFF
6.2 Action Code Docking
The tracking status of the tracking camera will be sent to the recording and broadcasting host in real
time as feedback via the network (UDP transmission mode) in action code form.
1. Configuration of Recording and Broadcasting Host Address
If the recording and broadcasting host uses a LAN connection to receive action code, then the user
needs to configure the host address via a web browser. Click
Advanced Settings -> Server
, as shown
below, then enter the Host Address and Host Port number.
