■
ASI Polarity
: (Option ASI only) Shows the ASI polarity (positive or
negative). The readout shows "N/A" when the signal input is not ASI.
■
ASI TS Bit Rate
: (Option ASI only) Show the bit rate of the transport stream
in Mbps.
■
ASI Sync Byte
: (Option ASI only) Shows the status of the sync byte error
check.
■
ASI CC Error
: (Option ASI only) Shows the status of the continuity counter
error check. When a Continuity Count error occurs, the value "NG" will be
displayed in red along with a number indicating the number of PIDs with
errors.
Status pop-up menu (SDI Status display).
Press and hold the STATUS button to
open the Status pop-up menu. The following menu selections are available:
■
Mute Alarms
: Mutes alarms for all Status display types.
■
Jitter1 HP Filter
: Select the filter type: Timing, Align, 10 Hz, 100 Hz,
1 kHz, 10 kHz, 100 kHz.
Video Session display
When an SDI signal is being monitored, the Video Session display shows several
performance parameters, such as CRC values, that you can view to get an
overview of the video input signal. This instrument maintains a running video
status session.
Figure 45: Video Session display of an HD-SDI signal
Display modes
WFM2300 and WFM2200A Waveform Monitors User Manual
131
Summary of Contents for WFM2200A
