Tektronix WFM2200A, User Manual

Page: 102 / 276

Display type.
Select from the following display types:
■
Timing Measure - Displays a Tektronix proprietary view that enables you to
easily compare and correct the timing between two signals. See Timing
Measure display on page 136.
■
Datalist (Option DATA only) - Displays the content of all digital signal
formats, structures, and transports (SD, HD, 3G, dual link, 4:2:2, 4:4:4, and
others) except for composite signals. See Datalist display (Option DATA
only) on page 83.
■
Bowtie - Displays the interchannel timing between Y Pb and Y Pr. See
Bowtie display on page 81.
■
ANC Data (Option DATA only) - Displays all of the ANC data in a video
signal. See ANC Data display (Option DATA only) on page 48.
■
AV Delay (Option AVDP only) - Displays results of AV Delay and
Propagation Time measurements.
■
ASI PID List Disp. (WFM2300 Option ASI only) - For MPEG2 transport
stream inputs, displays the MPEG TS PID tree with each stream element
having an LED icon to indicate the status of the element. See ASI PID List
display (WFM2300 Option ASI only) on page 54.
AV Delay Enable. Enables or disables the delay measurement. However, if the AV
Timing Mode is set to AV Delay or Propagation, the instrument will still be
outputting the measurement signal on the SDI OUT connector.
Clear Offset.
Clears the saved offset from the AV Delay measurement.
Save Offset.
When making AV Delay measurements only, saves the measurement
time of the current input as an offset to the measurement display. This saved time
becomes the zero point for additional AV Delay measurements.
AV Timing Mode.
Select from the following timing modes:
■
Off - Turns off the AV Delay or Propagation timing signal on the SDI OUT
connector.
■
AV Delay - Turns on the AV Delay signal on the SDI OUT connector.
■
Propagation - Turns on the Propagation timing signal on the SDI OUT
connector.
CONFIG menu
Use the Video/Gen Outputs > AV Timing Mode setting to select the desired
mode: Off , AV Delay , or Propagation . When you select AV Delay or
Propagation, the associated measurement signal is output from the SDI OUT
connector.
Display modes
80 WFM2300 and WFM2200A Waveform Monitors User Manual