Tektronix TPS2012B, User Manual

Page: 126 / 184

Reference
Video signal options Details
Odd Fields
Displays several fi elds and the oscilloscope triggers only on
odd numbered fi elds
Even Fields
Displays several fi elds and the oscilloscope triggers only on
even numbered fi elds
Undo Autoset Causes the oscilloscope to recall the previous setup
NOTE. Video autoset sets the Display Type option to Dots mode.
Cursor
Push the Cursor button to display the measurement cursors and Cursor Menu,
and then use the multipurpose knob to change the position of a cursor.
Options Settings Comments
Type 1
Time, Amplitude, Off Select and display the measurement
cursors; Time measures time, frequency,
and amplitude; Amplitude measures
amplitude, such as current or voltage
Source Channels 1, 2, 3 2 , 4 2 ,
MATH, REFA, REFB,
REFC
2 , REFD 2
Choose the waveform on which to take the
cursor measurements
Cursor readouts display the measurement
Δ Displays the absolute value of the
difference (delta) between the cursors
Cursor 1
Cursor 2 Displays selected cursor location (time
is referenced to the trigger position, and
amplitude to the reference connection)
1 For a Math FFT source, measures Frequency and Magnitude.
2
Available only on a 4-channel oscilloscope.
100 TPS2000B Series Digital Oscilloscope User Manual