Getting Started
1- 14
TMSSC2 604-Pin Socket Support
1.
Match and connect the A, D, C, and E LAI cables from the Master module
with the corresponding D3/D2 and A3/A2, D1/D0 and A1/A0, C1/C0 and
C3/C2, and E3/E2 and E1/E0 connector on the preprocessor unit. The LAI
cable connector is keyed for correct alignment to the preprocessor unit.
2.
Repeat step 1 to match and connect an LAI cable between Slave1 and Slave2
modules and the connectors on the preprocessor unit.
CAUTION.
To prevent damage to the P6860 probe and preprocessor unit, you
must always position the probes perpendicular to the foot print on the PCB.
Incorrect handling of the P6860 probe while connecting to or disconnecting from
the preprocessor unit can damage the probe.
3.
Repeat step 1 to match and connect the additional P6860 probe and LAI
cable connections between the Slave3 module and the connectors on the
preprocessor unit.
4.
Match and connect the A, D, C, and E P6860 probes from the Slave4 module
with the corresponding D3/D2 and A3/A2, D1/D0 and A1/A0, C1/C0 and
C3/C2, and E3/E2 and E1/E0 connector on the preprocessor unit. The P6860
probe connector is keyed for correct alignment to the preprocessor unit.
NOTE
. For more information about how to attach a P6860 probe to the
preprocessor unit, refer to the P6860 probe information on page 1--2.
Applying and Removing Power
To apply power to the probe adapter and target system, follow these steps:
1.
Make sure the power switch on the preprocessor unit is in the off position. If
powered off, the zero (0) is visible on the power switch.
2.
Plug the AC power cord into the IEC connector on the back of the preproces-
sor unit.
3.
Plug the AC power cord into an electrical outlet that you know is working
properly.
4.
Power on the probe adapter at the back of the preprocessor unit. A green,
power-on LED lights on the front of the preprocessor unit, indicating that the
probe adapter is active.
5.
Power on the target system.
To remove power from the target system and the probe adapter, reverse the
preceding steps. You can skip step 1.
LAI Cable and P6860
Probe Connections
(Four Modules)
Fifth Module
Summary of Contents for TMSSC2
