Basic Installation
Table 1: Accessory connection information
Item
Description
Monitor
If you use a non plug & play monitor, you
may need to change the Windows display
settings to achieve the proper resolution.
Printer
Connect the printer to the LPT (parallel) port.
Rackmount
The logic analyzer can be installed in
rackmount kits. Refer to the respective
rackmount kit instructions for installation
information.
Connecting Probes
After you have connected all the accessories, you can connect the probes to the
instrument. Refer to the appropriate section for your instrument.
For additional information on the individual probes, refer to the instructions that
accompanied your probes.
CAUTION.
When attaching the probe to the logic analyzer, you must use care to
evenly tighten probe screws until they are snug. First slightly tighten screws, then
snug each screw to 4 in-lbs (max). Undertightening the probe screws can result in
intermittent performance. Over tightening can result in stripped screws.
Connect the logic analyzer probes and the optional retaining brackets as shown.
(See Figure 3.)
4
TLA5000 Series Logic Analyzer Installation Manual
