Tektronix THS3014, User Manual

Page: 21 / 130

Introduction
Probe Type: Voltage, Current
Attenuation (Voltage): 1:1, 10:1, 100:1, 1000:1, 20:1, 200:1
Sensitivity (Current): 100 μ V/A, 1 mV/A, 10 mV/A, 100 mV/A, 400 mV/A,
1 V/A, 10 V/A, 100 V/A
Probe Calibration: Start Yes, Start No
The INPUT 1 OPTIONS submenu.
This submenu allows you to set the polarity and
bandwidth parameters and contains the following:
Polarity: Normal, Inverted, Variable
Bandwidth: Full, 20 kHz (HF reject), 20 MHz
Cursors
The Cursors button allows you to view and adjust cursors as follows:
The CURSOR submenu.
This menu allows you to turn select from the following
cursor types:
׀ : Single vertical cursor
׀׀ : Two vertical cursors
= : Two horizontal cursors
: Rise time cursor
: Fall time cursor
The MOVE submenu.
Press the arrows keys to move the cursor(s) right, left,
up, or down.
The T, 1/T, mVs, RMS submenu.
This submenu allows you to select the units to
view for the distance between the cursors. This menu option is only available
when the double vertical cursor is selected:
T: time
1/T: 1/time or frequency
mVs: Millivolts per second
RMS: Root mean squared
THS3000 Series Oscilloscopes User Manual 5