Installation
Menu button
1.
Press the probe
Menu
button to display the
Probe Control screen on the oscilloscope.
NOTE.
Probe menu screens vary slightly
between oscilloscope series; samples of
DPO7000 Series screens are shown here.
This screen includes controls for probe
functions that are not accessible on the
probe, such as Offset. Other functions can be
controlled from both locations.
2.
Use the touch-screen buttons on the
instrument to set the probe parameters.
3.
Press the probe
Menu
button again to
close the Probe Control screen.
NOTE.
If the probe Menu button does not bring
up or remove the Menu on the oscilloscope,
check for oscilloscope
fi
rmware updates.
6
TDP1500 Quick Start User Manual