Installation
Installation
Connecting to the host instrument
WARNING.
Your TekVPI instrument may
require a
fi
rmware upgrade to support full
functionality of the TDP0500 and TDP1000
probes. Before you connect the probe, check
the version requirements. (See page 43, Host
instrument
1.
Slide the probe into the TekVPI receptacle.
The probe snaps when fully engaged.
When you connect the probe, the host
instrument reads information from the
probe and identi
fi
es the probe type.
2.
To disconnect, press the latch release
button and pull away from the instrument.
4
TDP0500 & TDP1000 Quick Start User Manual
