Tektronix TCR801, Installation And Safety Instructions

Page: 14 / 67

Introduction to the TCR801
Description Quantity Tektronix part number
12 VDC 5 A AC-DC power supply;
50 to 60 Hz; 100 to 250 VAC 1 119-8726-00
Test lead, banana to banana, 18 in 1 174-7295-00
Product documentation
The following product documentation is available for download from
www.tek.com.
Front panel
Item Connector Description
1 Power button Power button to power unit on/off . Once unit is on, push (and release) to
attempt a relock, or hold >5 sec) to switch unit to standby.
2 Antistatic connection A banana-jack short to ground
3 LCD display 61 mm (W) x 12 mm (H), 2 x 20 liquid crystal display (LCD). Used to display
Ethernet Address and system state information
4 CLOCK1
5 CLOCK2
Clock electrical output (CLK/4 (13 GHz to 14.5 GHz) for a 52 to 58 Gbaud
input, CLK/2 (13 GHz to 14.5 GHz) for a 26 to 29 GBaud signal)
Single-ended, AC coupled, amplitude; Between 900 mVpp to 1.1 Vpp into
50
Ω terminated to ground. When output disabled, Vout RMS <5 mV
Both outputs are disabled/enabled at the same time.
8 TCR801 Installation and Safety Instructions