Tektronix TCP300A, User Manual

Page: 20 / 82

Getting Started
TCPA300 and TCPA400
Current Probe Ampli fi ers
The ampli fi er ampli fi es the current sensed by the probe and converts the current
to a proportional voltage that is displayed on an oscilloscope or other similar
measuring device.
Current Probes The following Tektronix current probes are compatible with the
TCPA300 Ampli
fi er:
TCP312A (30 A, 100 MHz)
TCP305A (50 A, 50 MHz)
TCP303 (150 A, 15 MHz)
The following Tektronix current probes are compatible with the
TCPA400 Ampli
fi er:
TCP404XL (750 A 1 , 2 MHz)
1
500 A continuous, 750 A DC derated with duty cycle
Oscilloscope An oscilloscope displays the output from the current measuring system. A 50 Ω
cable is included to connect the ampli fi er to the oscilloscope input channel. A
TEKPROBE-to-TEKPROBE interface cable is also included for connecting to
TEKPROBE level II oscilloscopes.
If the oscilloscope does not have an input that can be set to 50 Ω impedance, you
need a feedthrough 50 Ω termination. This termination is included as a standard
accessory with your TCPA300 and TCPA400 Current Probe Ampli fi ers.
2 TCPA300/400 Ampli fi ers and TCP300A/400 Series Current Probes User Manual