Tektronix TCP300 Series, User Manual, Page: 13 / 80

Compliance Information
This section lists the EMC (electromagnetic compliance) and environmental
standards with which the instrument complies.
EMC Compliance
EC Declaration of
Conformity – EMC Meets intent of Directive 2004/108/EC for Electromagnetic Compatibility.
Compliance was demonstrated to the following speci
fi cations as listed in the
Of fi cial Journal of the European Communities:
EN 61326-1:2006, EN 61326-2-1:2006.
EMC requirements for electrical equipment
for measurement, control, and laboratory use. 1 2 3
CISPR 11:2003. Radiated and conducted emissions, Group 1, Class A
IEC 61000-4-2:2001. Electrostatic discharge immunity
IEC 61000-4-3:2002. RF electromagnetic fi eld immunity
IEC 61000-4-4:2004. Electrical fast transient/burst immunity
IEC 61000-4-5:2001. Power line surge immunity
IEC 61000-4-6:2003. Conducted RF immunity
IEC 61000-4-11:2004. Voltage dips and interruptions immunity
4
EN 61000-3-2:2006. AC power line harmonic emissions
EN 61000-3-3:1995.
Voltage changes, fl uctuations, and fl icker
European Contact.
Tektronix UK, Ltd.
Western Peninsula
Western Road
Bracknell, RG12 1RF
United Kingdom
1 This product is intended for use in nonresidential areas only. Use in residential areas may cause electromagnetic
interference.
2 Emissions which exceed the levels required by this standard may occur when this equipment is connected to a
test object.
3 To ensure compliance with the EMC standards listed here, high quality shielded interface cables should be used.
4 Performance Criterion C applied at the 70%/25 cycle Voltage-Dip and the 0%/250 cycle Voltage-Interruption test
levels (IEC 61000-4-11).
TCPA300/400 Ampli fi ers and TCP300/400 Series Current Probes User Manual vii