Tektronix TCP0020, Instruction Manual

Page: 89 / 103

Performance Veri fi cation
DC Gain Accuracy
This test checks the DC gain accuracy of the probe. If the measurements are out of the speci fi ed limits in the test record, refer to
the Adjustments section. (See page 72.)
TCP2020 Setup
1.
Connect a BNC-to-Dual Banana adapter to
the digital multimeter (DMM) input.
2. Connect the TCP2020 probe output to the
BNC adapter attached to the DMM.
3. Proceed to step 6 in the TCP0020 &
TCP2020 Test section. (See page 67,
TCP0020 & TCP2020 Test .)
20 A Current Probes Instruction Manual 65