Tektronix RSA6100A Series, Help Manual

Page: 97 / 415

General Signal Viewing > Spectrogram Spectrogram Settings
Spectrogram Settings
Menu Bar: Setup > Settings
Front Panel / Application Toolbar: Settings
The Setup settings for the Spectrogram display are visible when Spectrogram is the selected display.
Settings tab Description
Freq & Span (see page 98) Sets frequency and span parameters for the Spectrogram display.
BW (see page 103) Sets Resolution Bandwidth and windowing parameters.
Trace (see page 85) Sets Trace display parameters.
Amplitude Scale (see page 86) Selects between 2-D and 3-D, sets height scale, position and orientation for 3-D display.
Sets color parameters for the spectrogram trace.
Time & Freq Scale (see
page 86) Sets the vertical and horizontal scale parameters for the spectrogram trace. The
Spectrum Monitor controls are also on this tab.
Prefs (see page 106) Speci fi es whether or not certain display elements are shown.
xxx
Trace Tab
The Spectrogram Trace tab controls let you specify the Detection method, save traces, and recall saved
traces for display. The Spectrogram Trace tab does not have all the controls that other Trace tabs contain,
however, it does have a unique display element, the Selected Line readout. For details on Detection,
Freeze, and saving and recalling traces, see the
Traces Tab (see page 99) .
Selected Line
Displays the time at the Selected Line. If Markers are enabled, the selected line is positioned by the
selected marker. If no markers are enabled, the selected line is the
fi rst line in the current analysis period.
RSA6100A Series Real-Time Spectrum Analyzers Help
85