Tektronix RSA6100A Series, Help Manual

Page: 107 / 415

General Signal Viewing > Phase Vs Time Phase Vs Time Settings
Item Display element Description
1
Top of graph adjustment Adjusts the vertical scale. Use the knob to adjust the value of the top of the
graph.
2 Vertical offset adjustment Adjusts the phase error shown at the vertical center of the display.
3 Autoscale button Adjusts the vertical and horizontal settings so that the entire trace fi ts in the
view.
4 Horizontal Offset Adjusts the horizontal position of the trace.
5 Max and Min readouts Displays the maximum and minimum value of the phase error within the
analysis times and the times at which they occurred.
6 Horizontal Scale Sets the time spanned by the graph.
7 Clear button Restarts multi-trace functions (Avg, Hold).
8 Trace function Shows the trace function as set on the Settings > Trace tab.
xxx
Changing the Phase vs Time Display Settings (see page 95)
Phase Vs Time Settings
Menu Bar: Setup > Settings
Front Panel / Application Toolbar: Settings
The settings for the Phase vs. Time display are shown in the following table.
Settings tab
Description
Freq & Span (see page 98) Sets the frequency and span parameters.
Trace (see page 99) Sets the trace display parameters.
Scale (see page 105) Sets the Vertical and Horizontal scale and offset parameters.
Prefs (see page 106) Speci fi es whether certain display elements are visible.
xxx
RSA6100A Series Real-Time Spectrum Analyzers Help
95